# Does my modification need an engineering certificate?

> In Australia, a modification needs certification when it is a 'significant' modification under VSB14 or your state's code — engine swaps, forced induction, aftermarket braking components, seats and restraints, and suspension beyond ride-height limits. Basic bolt-on changes within manufacturer and ADR limits usually do not.

Source: https://modvault.com.au/guides/does-my-mod-need-engineering/
Last checked: 2026-08-24

## The rule of thumb

If a modification changes how the vehicle stops, steers, restrains occupants, or how much power and heat it makes, assume it needs certification until a certifier tells you otherwise. If it is cosmetic, ADR-compliant and within the manufacturer's placard limits, it usually does not.

That heuristic gets you 80% of the way. The remaining 20% is jurisdictional, and it is where people get defected.

## Modification-by-modification

| Modification | VSB14 | Certification typically required? | Notes |
| --- | --- | --- | --- |
| Engine swap / conversion | LA | Yes | Always certify before updating the registration record |
| Turbo / supercharger conversion | LA | Yes | Certification and often emissions testing |
| ECU tune / piggyback | LA | No | Usually no certificate if emissions systems are untouched — but tell your insurer |
| Springs & shocks within limits | LS | No | Ride-height limits apply — measure before and after |
| Coilovers / large drop or lift | LS | Yes | Beyond basic limits means certification |
| Big brake kit | LH | Yes | Aftermarket braking components are significant modifications |
| Racing seats & harnesses | LK | Yes | Seats and restraints always require certification |
| Wheels & tyres within placard | LS | No | Stay within diameter and track limits or certify |
| Exhaust system | LA | No | Must meet noise and emissions limits; keep catalytic converters |
| GVM upgrade (4WD) | LS | Yes | Federal second stage manufacture or state certifier route |
| Body / aero, widebody, wing | LO | Yes | Projection and driver-vision rules apply |
| Lighting & accessories | LO | No | Minor if ADR-compliant and correctly aimed |

## 'No certificate needed' still means 'keep the record'

The modifications that do not need certification are exactly the ones people fail to document — and exactly the ones a roadside inspection or an insurance assessor asks about. A tune with no paperwork looks identical to an undisclosed one.

Keep the invoice, the specification and a dated photograph for every change, certified or not. It costs nothing at the time and is irreplaceable later.

## The order that saves money

Speak to a certifier during planning. Photograph each stage. Keep receipts as you go. Certify before you update the registration record. Store everything where you can produce it in seconds — roadside, at inspection, or at sale.

## Frequently asked questions

### Do I need engineering for a cat-back exhaust?

Usually not, provided the vehicle still meets noise and emissions limits and the catalytic converter is retained. Rules on noise are enforced at the roadside, so keep the product's compliance data.

### Do I need engineering for an ECU tune?

Typically no certificate is required if emissions control systems are untouched, but you must disclose the tune to your insurer. Undisclosed power increases are a common reason claims are reduced or refused.

### Are aftermarket seats legal without certification?

Seats and restraints fall under VSB14 section LK and generally require certification, including the anchor points. This is one of the most commonly missed items at inspection.

---

This guide is general information for Australian vehicle owners, not legal or engineering advice. Requirements change and are applied at the discretion of your state authority. Always confirm with your road authority or a licensed certifier before starting work.